Black Line On Paper When Printing Cannon

Black Line On Paper When Printing Cannon – I have a canon pixma mx722. If black vertical lines appear when faxing or making copies, then the scanner may need to be cleaned. How to solve line problem black line problem or horizontal line problem in hp/canon single and multi function mono laser printer. When scanning a document through the adf or directly from the glass plate the document has a 1 inch thick vertical black line.

Wrinkles may occur when using damp paper, or streaks might appear at the lead edge of the paper when printing images with halftones. A copier drum for an ir2200 has a life cycle of about 50 to 80. Set [special print adjustment b] to [mode 1]. If the problem is not solved, specify [mode 2].

Black Line On Paper When Printing Cannon

If your prints and copies have a blank vertical line, the problem most likely is with dirty timing strip. When black streaks appears on the printouts. In the following cases, the fixing unit may be dirty.

To clean the scanner glass do the following: If cleaning the fixing unit does not solve the problem, setting to may solve.

The printer in the video is canon pixma mg7720.

When a toner cartridge is replaced. I have done a nozzle clean, a roller clean and a bottom plate clean. If the line that is being produced only occurs when using the automatic document feeder (adf) and not when making a copy via the platen glass, the issue is commonly due to a small mark or debris on the scanning glass area that lines up.

It is sometimes hard to get to a timing strip, but. Cleaning the fixing roller of the printer. If there is no line, try printing something.

Canon i560 printer problems racknasve